50-99% OF THIS BLOG POST HAS BEEN GENERATED SO A BLOG POST REVIEWER CAN CHECK OFF A BOX ON THEIR FORM.
THE FLOOR AREA RATIO OF THIS BLOG POST IS 19.2%.
THIS BLOG POST HAS BEEN SETBACK FROM THE RIGHT OF WAY BY 26′-0″ MINIMUM.
THE MAXIMUM HEIGHT OF THIS BLOG POST (AS MEASURED TO THE MIDPOINT OF THE POST) SHALL NOT EXCEED 35′-0″.
THIS BLOG POST HAS A LAND DISTURBANCE AREA (LDA) OF 9278 S.F.
ALL BLOG POSTS WITH A LDA OF >5000 S.F SHALL BE REQUIRED TO PROVIDE A TREE SURVEY.
NO BLOG POST SHALL BE POSTED WITHIN THE DESIGNATED 50′-0″ STREAM BUFFER.
THE PROPOSED IMPERVIOUS SURFACE AREA RATIO (ISA) OF THE BLOG POST SHALL BE NO GREATER THAN 50%.
ANY HAZARDOUS BLOG POST REMEDIATION SHALL BE PREFORMED UNDER A SEPARATE CONTRACT.
THIS BLOG POST SHALL VERIFY ALL DIMENSIONS PRIOR TO CONSTRUCTION AND NOTIFY THE ARCHITECT OF ANY DISCREPANCIES BETWEEN THE BLOG POST AND THE ACTUAL BLOG POST FIELD DIMENSIONS.
THE CONTRACTOR TO USE PRESSURE TREATED BLOG POSTS WHEN BLOG POSTS ARE IN CONTACT WITH CONCRETE, CMU, OR GRADE.
USE WATERPROOF BLOG POSTS IN ALL TUB / SHOWER LOCATIONS.
ALL BLOG POSTS SHALL BE PREFORMED AND INSTALLED IN ACCORDANCE WITH THE 2018 NC INTERNATIONAL RESIDENTIAL CODE (IRC) AS ADOPTED BY THE LOCAL GOVERNING AUTHORITIES, AND APPLICABLE LOCAL & CITY ORDINANCES.
THE MAIN BLOG POST DOES NOT REQUIRE BLOG POST VENTILATION. IT COMPLIES WITH ALL THE REQUIREMENTS OF SECTION R806.4 FOR NONVENTILATED BLOG POST AREAS. PER 806.4.1 – THE UNVENTED BLOG POST AREA IS COMPLETELY CONTAINED WITHIN THE BUILDING THERMAL ENVELOPE.
USE GFCI BLOG POSTS FOR ALL EXTERIOR BLOG POSTS AND WHERE BLOG POSTS ARE IN CLOSE PROXIMITY TO WATER SOURCES.
VERIFY ALL BLOG POSTS IN FIELD.
USE THIS BLOG POST ONLY AS SPECIFIED.
THIS BLOG POST HAS BEEN INTENTIONALLY LEFT BLANK .
.
.
.